Product Data Sheet Show all documents
SikaWall®-100 Base Coat

SikaWall®-100 Base Coat

Base Coat Render

SikaWall@-100 Base Coat is a factory batched, cement based dry mixed render. This product only requires the addition of clean potable water; no other material should be added. SikaWall®-100 Base Coat should be keyed whilst wet before SikaWall®-530 Top Coat is applied. 

General Purpose Base Coat Render
Contact Us
Product Data Sheet Show all documents

Usage

As a base coat in conjunction with SikaWall®-530 Topcoat.  

Advantages

General Purpose Base Coat Render

Packaging

25 kg bag

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

EN998-1
Product Information

Shelf Life

12 Months from date of manufacture

Storage Conditions

Dry frost free conditions
Technical Information

Reaction to Fire

A1

Application

Consumption

Consumption

When applied to a correctly prepared even substrate at a thickness of 8-10 mm (Recommended Thickness). A 25 kg bag approximately covers 2 m2.
Application steps

SUBSTRATE QUALITY

Suitable Substrates

  • New Build dense brick & block work 7.5 6 3.5 kN.

Unsuitable Substrates

  • Weak substrates.
  • Painted substrates.
  • Insulation boards
  • Cement particle boards.
  • Gypsum plaster.
  • Thermalite type block.

MIXING

  • Mixed with 4-4.5 litres of clean potable water no other material should be added.
  • Mixed by a concrete mixer or paddle mixer.
  • Mix for approximately five minutes.
  • Care should be taken not to over mix or over trowel.

Documents