Product Data Sheet Safety Data Sheet Show all documents
Parex® REVLANE + REGULATEUR

Parex® REVLANE + REGULATEUR

PRIMER FOR SIKA® ACRYLIC AND SILOXANE RENDER SYSTEMS

REVLANE REGULATEUR is an acrylic-based,ready-to-use coloured primer designed to adjust the base absorption to substrates and  ncrease the depth of colour prior to the application of Parex® REVLANE top coat finishes. REVLANE REGULATEUR can be hand or spray applied, is water-vapour permeable and does not create a vapour retarder.

  • Hand or Spray applied
  • Water Vapour Permeable
  • Ready to use
Product Data Sheet Safety Data Sheet Show all documents

Usage

Primer for Revlane Acrylic and Siloxane Finishes  

Advantages

  • Hand or Spray applied
  • Water Vapour Permeable
  • Ready to use

Packaging

20 kg Container

Colour

Available in a range of standard shades which will depend upon the finishing colour of the REVLANE top coat finish.


Colour references for REVLANE REGULATEUR
PRIMER to suit top coat colours
PB20 - Blue shades
PG00 - White and Cream shades
PG30 - Grey shades
PG50 - Dark Grey shades
PJ40 - Yellow shades
PR60 - Red shades
PT90 - Orange shades
PV30 - Green shades

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

UKTA-0836-22/6255

UKTA-0836-22/6256
Product Information

Composition

  • Binder base: 100 % acrylic.
  • Water based.
  • Colour: white or tinted to desired colour.

Shelf life

12 Month Shelf Life

Storage conditions

Shelf life applicable when stored in unopened original packing in dry, frost-free conditions. Store away from high temperatures and
sources of heat.

Density

1.50 ± 0.05 g/cm3

Application

Application Information

Substrates

SUITABLE FOR

  • In situ and pre-formed concrete.
  • Base coats in accordance with BS EN 13914-1.
  • Parex® grey one-coat renders e.g. Parmurex*, Monogris E*
  • Sikatherm and Parexthem range of External Wall Insulation Systems (EWI).
  • Parexdirect render systems.
  • Internal walls, plaster (gypsum) substrates
Consumption

Consumption

COVERAGE
These values are provided as guidance only and may vary subject to substrate conditions.
One coat application: 80 to 100m2 per container, approximately, depending on the method of application and surface to which it is applied.
 
Application steps

EQUIPMENT

EQUIPMENT REQUIRED

  • Woollen roller, brush or suitable spray equipment.
  • Clean all tools with water after the application.

APPLICATION

INSTRUCTIONS
SUBSTRATE PREPARATION

  • The substrate must be clean and free from dirt and dust.

APPLICATION

  • Apply REVLANE REGULATEUR using a woollen roller, brush or spray equipment.
  • Allow to dry for 2 to 12 hours according to the temperature and the substrate, before applying the top coat finish.
  • REVLANE REGULATEUR must be completely dry before any Parex finish is applied.
  •  

Documents