Product Data Sheet Show all documents

Sikafloor® MultiDur EB-14 Rapid

BROADCAST UNICOLOUR EPOXY FLOOR COVERING FOR CAR PARKING STRUCTURES

Sikafloor® MultiDur EB-14 Rapid is a slip resistant, coloured, rigid flooring system based on epoxy resins.

  • Good chemical and mechanical resistance
  • Easy application
  • Liquid proof
  • Gloss finish
  • Easy cleanability
Product Data Sheet Show all documents

Usage

  • For concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
  • For multi-storey and underground car parks and for wet process areas, e.g. beverage and food industry
 

Advantages

  • Good chemical and mechanical resistance
  • Easy application
  • Liquid proof
  • Gloss finish
  • Easy cleanability

Packaging

Please refer to the individual Product Data Sheet

Colour

Available in various colour shades.

Appearance

Slip resistant, gloss finish

System Details

System information

System Structure

Sikafloor® MultiDur EB-14 Rapid system 1 (~3-4 mm)

1. Scratch coat & broadcastSikafloor®-151 & broadcast with quartz sand 0.3–0.8 mm
2. Wearing coatSikafloor®-18 Pronto

Sikafloor® MultiDur EB-14 Rapid system 2 (~2-3 mm)

1. Scratch coat & broadcastSikafloor®-151 & broadcast with quartz sand 0.3–0.8 mm
2. Wearing coatSikafloor®-18 Pronto

Sikafloor® MultiDur EB-14 Rapid system 3 (~5-6 mm)

1. PrimerSikafloor®-151 & broadcast with quartz sand 0.3–0.8 mm
2. Base coatSikafloor®-151 filled with quartz sand 0.06–0.3 mm plus Extender T

3. Broadcasting

quartz sand 0.6–1.2 mm
4. Wearing coatSikafloor®-18 Pronto

Composition

Epoxy (base layer) & PMMA (top coat)

Shelf Life

Please refer to the individual Product Data Sheet

Storage Conditions

Please refer to the individual Product Data Sheet
Technical Information

Chemical Resistance

Please refer to the chemical resistance chart of Sikafloor®-18 Pronto

Thermal Resistance

Exposure*Dry heat
Permanent+50 °C
Short-term max. 1 h+80 °C

Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.

Skid / Slip Resistance

R11 V6

(DIN 51130)

Application

Application Information

Product Temperature

Please refer to the individual Product Data Sheet

Ambient Air Temperature

+10 °C min. / +30 °C max.

Relative Air Humidity

80 % r.h. max.

Dew Point

Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to
reduce the risk of condensation or blooming on the floor finish.

Substrate Temperature

+10 °C min. / +30 °C max.

Substrate Moisture Content

When performing application work with Sikafloor® MultiDur EB-14 Rapid, the substrate moisture content must not exceed 4 % pbw measured by Tramex.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene-sheet).

Waiting Time / Overcoating

Before applying Sikafloor®-151 base layer on Sikafloor®-151 allow:

Substrate temperatureMinimumMaximum
+10 °C24 hours3 days
+20 °C12 hours2 days
+30 °C8 hours1 day

Before applying Sikafloor®-18 Pronto on Sikafloor®-151 allow:

Substrate temperature

Minimum

Maximum

+10 °C24 hours3 days

+20 °C

12 hours

2 days

+30 °C

8 hours

1 day

Before applying Sikafloor®-18 Pronto on Sikafloor®-18 Pronto allow:

Substrate temperature

Minimum

Maximum

+10 °C~ 50 minutesn/a
+20 °C~ 40 minutes

n/a

+30 °C~ 30 minutes

n/a

Applied Product Ready for Use

Temperature

Foot traffic

Light traffic

Full cure

+10 °C~ 72 hours~ 6 days~ 10 days
+20 °C~ 24 hours

~ 4 days

~ 7 days
+30 °C~ 18 hours~ 2 days~ 5 days
Application consumption

Consumption

Sikafloor® MultiDur EB-14 Rapid system 1 (~3-4mm, Rigid broadcast system, unreinforced)

Coating System

Product

Consumption

Scratch Coat1 × Sikafloor®-151 filled at 1:0.5 with quartz sand 0.06–0.3mm~1.8 kg/m²
Broadcast in excessquartz sand 0.3–0.8 mm~6 kg/m²
Top coat1-2 × Sikafloor®-18 Pronto~0.5 kg/m²

Sikafloor® MultiDur EB-14 Rapid system 2 (~2-3mm, Rigid broadcast system, unreinforced)

Coating SystemProductConsumption
Scratch Coat1 × Sikafloor®-151 filled at 1:0.5 with quartz sand 0.06–0.3mm~1.2 kg/m²
Broadcast in excessquartz sand 0.3–0.8 mm~6 kg/m²

Top coat

1-2 × Sikafloor®-18 Pronto

~0.5 kg/m²

Sikafloor® MultiDur EB-14 Rapid system 3 (~5-6mm, Rigid broadcast ramp system, unreinforced)

Coating System

Product

Consumption

Primer1-2 × Sikafloor®-1511-2 x ~0.4 kg/m²
Broadcastingquartz sand 0.6–1.2 mm~2-3 kg/m²
Base Coat1 × Sikafloor®-151 filled at 1:1 with quartz sand 0.06–0.3mm + 2% Extender T

~3.2 kg/m²

Broadcast in excessquartz sand 0.6–1.2 mm~6 kg/m²
Top coat2 × Sikafloor®-18 Pronto~0.7 kg/m² (Total)

If necessary, different aggregate may be used in order to fulfil the client’s specific requirements. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level and wastage etc.
All areas subject to potential movement should be fleece reinforced with Sika Reemat Premium. Please consult Sika for further information.
Application steps

CLEANING

Please refer to the Information Manual Sikafloor®- Cleaning Regime

Documents