Sikafloor® MultiDur EB- 10
Slip-resistant, coloured, epoxy floor coating system
Sikafloor® MultiDur EB- 10 is a broadcast, coloured, rigid epoxy floor coating system for areas subject to traffic and high mechanical loads.
- Low odour
- Low VOC emissions
- Good mechanical resistance
- Good resistance to specific chemicals
- Good slip resistance
- Low maintenance
- Seamless
System Structure
Usage
Sikafloor® MultiDur EB- 10 is used in industrial buildings such as:- Car park decks
- Food and beverage facilities
- Logistics facilities and warehouses
- Manufacturing facilities and workshops
- The System may only be used by experienced professionals.
- The System may only be used for interior applications.
Advantages
- Low odour
- Low VOC emissions
- Good mechanical resistance
- Good resistance to specific chemicals
- Good slip resistance
- Low maintenance
- Seamless
Colour
Available in various colour shades
Appearance
Slip-resistant, gloss finish
System Details
APPROVALS / STANDARDS
-
Reaction to fire EN 13501-1, Sikafloor® MultiDur EB-10, GHENT, Test Report No. CR 24-1080-01
System Structure
Sikafloor® MultiDur EB- 10
Sikafloor® MultiDur EB- 10 : System A (~ 1 to 2 mm. thickness)
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 |
| Broadcast in excess | Quartz sand 0.3–0.8 mm |
| Top Coat | 1 - 2x Sikafloor® MultiDur EB- 10 |
Sikafloor® MultiDur EB- 10 : System B (~ 2 to 3 mm. thickness)
| Scratch coat | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 |
| Broadcast in excess | Quartz sand 0.3–0.8 mm |
| Top Coat | 1 - 2x Sikafloor® MultiDur EB- 10 |
Sikafloor® MultiDur EB- 10 : System C (~ 3 to 4 mm. thickness)
| Scratch coat | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 |
| Broadcast in excess | Quartz sand 0.3–0.8 mm |
| Top Coat | 1 - 2x Sikafloor® MultiDur EB- 10 |
Sikafloor® MultiDur EB- 10 : System D (~ 5 to 6 mm. thickness)
| Primer | Sikafloor®-150 Plus, or Sikafloor®-151, or Sikafloor®-1590 |
| Broadcast in excess | Quartz sand 0.7–1.2 mm |
| Body Coat | 1 × Sikafloor®-150/151/1590 filled at 1:1 with quartz sand 0.06–0.3mm + 2% Extender T |
| Broadcast in excess | quartz sand 0.7–1.2 mm |
| Top Coat | 1 - 2x Sikafloor® MultiDur EB- 10 |
Contact Sika Technical Service for information on choosing the right primer for your project.
Composition
Epoxy
Nominal thickness
2 mm to 3 mm
Tensile adhesion strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Bfl-s1 | (EN 13501-1) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Skid / Slip Resistance
| Class | R 12 |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
When using Sikafloor®-1590 refer to the individual Product Data Sheet for specific information on waiting time to overcoating.
Before applying Sikafloor®-264 Plus on the broadcast primer allow:
Temperature | Minimum | Maximum |
+10 °C | 17 hours | 3 days |
+20 °C | 9 hours | 48 hours |
+30 °C | 7 hours | 24 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | 30 hours | 6 days | 10 days |
| +20 °C | 24 hours | 4 days | 7 days |
| +30 °C | 16 hours | 2 days | 5 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
Sikafloor® MultiDur EB- 10 : System A (~ 1 to 2 mm. thickness)
Thin coating system where substrate requirements are minimal. (e.g., new build projects)
| Layer | Product | Consumption |
| Primer | Sikafloor®-150 Plus/-151/-1590 filled at 1:0.5 with quartz sand 0.06–0.3mm. | ~ 0.6 - 0.9 kg/m2 |
| Broadcast in excess | Quartz sand 0.3–0.8 mm | ~ 5 kg/m2 |
| Top Coat | 1 - 2x Sikafloor®-264 Plus | ~ 0.6 kg/m2 |
Sikafloor® MultiDur EB- 10 : System B (~ 2 to 3 mm. thickness)
Coating system with a light scratch coat suitable for low-traffic areas. (e.g., car park bays, light industrial traffic)
| Layer | Product | Consumption |
| Scratch coat | Sikafloor®-150 Plus/-151/-1590 filled at 1:0.5 with quartz sand 0.06–0.3mm. | ~ 1.2 kg/m2 |
| Broadcast in excess | Quartz sand 0.3–0.8 mm | ~ 5 kg/m2 |
| Top Coat | 1 - 2x Sikafloor®-264 Plus | ~ 0.7 kg/m2 |
Sikafloor® MultiDur EB- 10 : System C (~ 3 to 4 mm. thickness)
Coating system with a heavy scratch coat suitable for traffic areas. (e.g., driving aisles, forklift traffic)
| Layer | Product | Consumption |
| Scratch coat | Sikafloor®-150 Plus/-151/-1590 filled at 1:0.5 with quartz sand 0.06–0.3mm. | ~ 1.8 kg/m2 |
| Broadcast in excess | Quartz sand 0.3–0.8 mm | ~ 6 kg/m2 |
| Top Coat | 1 - 2x Sikafloor®-264 Plus | ~ 0.7 kg/m2 |
Sikafloor® MultiDur EB- 10 : System D (~ 5 to 6 mm. thickness)
Coating system with an intermediate body coat suitable for heavy traffic areas.(e.g: car park ramps, heavy industrial traffic)
| Layer | Product | Consumption |
| Primer | Sikafloor®-150 Plus/-151/-1590 filled at 1:0.5 with quartz sand 0.06–0.3mm. | ~ 0.4 kg/m2 |
| Broadcast in excess | Quartz sand 0.7–1.2 mm | ~ 2-3 kg/m2 |
| Body Coat | 1 × Sikafloor®-150/-151/-1590 filled at 1:1 with quartz sand 0.06–0.3mm + 2% Extender T | ~ 3.2 kg/m2 |
| Broadcast in excess | Quartz sand 0.7–1.2 mm | ~ 5 kg/m2 |
| Top Coat | 1 - 2x Sikafloor®-264 Plus | ~ 0.7 kg/m2 |
Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply the product to a test area to calculate the exact consumption of the specific substrate conditions and proposed application equipment.
Contact Sika Technical Service for information on choosing the right primer for your project.