Sikafloor® MultiDur EB-27 ECC
Slip resistant broadcast coloured epoxy floor system for damp substrates.
Sikafloor® MultiDur EB-27 ECC is a 2-part epoxy coloured resin based flooring system that can provide a hard wearing, seamless, low maintenance, slip resistant finish when broadcast with different aggregate grades. For damp substrates and medium - heavy wear conditions. Thickness 4.0–6.0 mm. Internal use
- Seamless
- High wear resistance
- Good chemical and mechanical resistance
- Easy application
- Waterproof
- Gloss finish
- Slip resistant
- Low maintenance
- Good bond to green or hardened damp/dry concrete
System Structure
Usage
- On concrete and cementitious screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- On multi-storey and underground car park decks and for wet process areas, e.g. beverage and food industry
Advantages
- Seamless
- High wear resistance
- Good chemical and mechanical resistance
- Easy application
- Waterproof
- Gloss finish
- Slip resistant
- Low maintenance
- Good bond to green or hardened damp/dry concrete
Packaging
Refer to the individual Product Data Sheet
Colour
Available in many colours
Appearance
Slip resistant gloss finish
System Details
ENVIRONMENTAL INFORMATION
-
Conformity with LEED v4 MRc 2 (Option 1): Building Product Disclosure and Optimization – Environmental Product Declarations
-
Conformity with LEED v4 MRc 4 (Option 2): Building Product Disclosure and Optimization - Material Ingredients
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection product for concrete - Coating
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings
- Particle emission ISO 14644-1, CSM Statement of Qualification, Fraunhofer IPA Report No. SI 1709-952
- Outgassing behavior VOC/SVOC ISO 14644-8, CSM Statement of Qualification, Fraunhofer IPA, Report No. SI 1709-952
- Indirect contact to foodstuff (EU) 1935/2004, Sikafloor®-264 N Sikafloor®-264 N LO, Fesenius Bericht, Test report No. 3419034-01
- VOC emission, Sikafloor®-264 N, CSM Fraunhofer, Certificate No. SI 1709-952
- Particle emission ISO 14644-1, CSM Statement of Qualification, Fraunhofer IPA Report No. SI 1709-952
System Structure
Sikafloor® MultiDur EB-27 ECC (~ 4–6 mm)
| Layer | Product |
| 1. Primer | Sikafloor®-155 WN |
| 2. Levelling screed | Sikafloor®-81 EpoCem® |
| 3. Wearing finish | Sikafloor®-263 SL N + aggregate broadcast quartz sand 0.3–0.8 mm |
| 4. Seal / Top coat | Sikafloor®-264 N |
Composition
Epoxy
Nominal Thickness
~ 4–6 mm
Shelf Life
Refer to the individual Product Data Sheet
Storage Conditions
Refer to the individual Product Data Sheet
Abrasion Resistance
| ~41 mg (CS 10/1000/1000) (8 days / +23 °C) | (DIN 53 109 Taber Abraser Test) |
Compressive Strength
| ~60 N/mm2 ( 28 days at 23 °C / 50 % R.H.) | (EN 13892-2) |
Tensile Strength
| ~14 N/mm2 (28 days at 23 °C / 50 % R.H.) | (EN 13892-2) |
Tensile Adhesion Strength
| > 1.5 N/mm2 (failure in concrete) | (ISO 4624) |
Chemical Resistance
Resistant to many chemicals. Contact Sika Technical Service for specific information.
Coefficient of Friction
| μ = 0.54 | (DIN 51131) |
Skid / Slip Resistance
| R11 V4 | (DIN 51130) |
Application
Ambient Air Temperature
+10 °C min / +30 °C max
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor temperature must be at least 3 °C above the dew point to reduce the risk of condensation or blooming on the floor
finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
Can be applied on green or damp concrete with no standing water.
Although the system can be applied onto green concrete surfaces (> 24 hours), it is advised to allow at least 3 days for early concrete shrinkage to occur in order to prevent shrinkage cracks from appearing on the wearing surface.
Waiting Time / Overcoating
Before applying Sikafloor®-81 EpoCem® on Sikafloor®-155 WN allow:
| Substrate Temperature | Minimum | Maximum |
| +10 °C | 12 hours | 72 hours |
| +20 °C | 6 hours | 48 hours |
| +30 °C | 4 hours | 24 hours |
Sikafloor®-81 EpoCem® can be overcoated with vapour impermeable coatings when the surface humidity falls below 4 %.
Not earlier than :
| Substrate Temperature | Waiting Time |
| +10 °C | 2 days |
| +20 °C | 1 day |
| +30 °C | 1 day |
Before applying Sikafloor®-264 N on Sikafloor®-263 SL N allow:
| Substrate Temperature | Minimum | Maximum |
| +10 °C | 30 hours | 72 hours |
| +20 °C | 24 hours | 48 hours |
| +30 °C | 16 hours | 24 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
| +20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
| +30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur EB-27 ECC (~ 4 – 6mm)
| Layer | Product | Consumption |
| 1. Primer | 1 × Sikafloor®-155 WN | ~0.3–0.5 kg/m2 thinned with 10 % water |
| 2.Levelling screed | 1 × Sikafloor®-81 Epo-Cem® | ~2.25 kg/m2/mm |
| 3. Wearing layer | 1 × Sikafloor®-263 SL N filled 1:1 with quartz sand 0.06–0.3 mm | ~ 4 kg /m2 (2 kg/m² resin + 2 kg/m² quartz sand) for 2 mm film thickness |
| 4.Sand broadcast | Quartz Sand 0.3–0.8 mm | ~ 4–6 kg/m2 |
| 5. Seal / Top coat | 1–2 × Sikafloor®-264 N | ~0.6–0.8 kg/m2 |
CLEANING
Refer to the Information Manual Sikafloor®-Cleaning Regime