Product Data Sheet Show all documents

Sika ComfortFloor® PS-22

Smooth unicolour low VOC elastic polyurethane floor covering

Sika ComfortFloor® PS-22 is an elastic, self-smoothing polyurethane flooring system. It is especially designed for seamless indoor applications that are required to be soft underfoot and at the same time wear and scratch resistant.

  • Provides low life cycle cost due to a good wear and scratch resistance.
  • Contributes to a good indoor air quality and is tested to most recognised Green Building schemes.
  • Can be overcoated at the end of the lifetime and doesn't need to be disposed of.
  • Comfortable to walk on.
  • Available in standard and customised colours.
  • Easy to clean and maintain.
Contact Us
Product Data Sheet Show all documents

Usage

The System can be used in commercial and public buildings and areas such as:
  • Schools, universities and libraries
  • Offices and administration centres
  • Healthcare facilities, care homes and hospitals
  • Shopping centres and malls
  • Restaurants, canteens and cafes
  • Residential areas and homes
  • Hotels and guesthouses
  • Heritage tourist attractions, museums and visitor centres
 

Advantages

  • Provides low life cycle cost due to a good wear and scratch resistance.
  • Contributes to a good indoor air quality and is tested to most recognised Green Building schemes.
  • Can be overcoated at the end of the lifetime and doesn't need to be disposed of.
  • Comfortable to walk on.
  • Available in standard and customised colours.
  • Easy to clean and maintain.

Colour

Available in a wide range of colours. Please contact Sika customer service for availability.

Appearance

Final floor appearance

Silky matt finish

System Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

  • Class A+ according to French Regulation on VOC emissions.
  • VOC emission classification of building materials RTS M1.
  • Complies with Indoor Air Comfort Gold® limit values by EUROFINS.
  • VOC emission certificate according to AgBB und DIBt approval requirements.
System information

System Structure

Primer or scratch coat

Sikafloor®-150/-151

Refer to the individual Product Data Sheet.

Wearing layer

Sikafloor®-3310 (unfilled or filled with quartz sand)

Seal coat / top coat

Sikafloor®-305 W

Composition

Polyurethane

Nominal thickness

~2 mm to 3 mm

 
Technical Information

Shore A Hardness

~80 (after 14 days at +23 °C, unfilled)

(EN ISO 868)

Resistance to moving furniture

No damage

(EN 424)

Castor chair resistance

No damage (25 000 cycles)

(EN 425)

Resistance to Impact

Class I: ≥ 4 Nm

(EN ISO 6272-1)

Indentation

0,05 mm

Tensile Strength

~8,0 N/mm²

(EN ISO 527-2)

Tensile adhesion strength

> 1,5 N/mm² (failure in concrete)

(EN 1542)

Reaction to Fire

Bfl-s1

(EN 13501-1)

Chemical Resistance

The System always has to be sealed with Sikafloor®-305 W. Refer to the chemical resistance of Sikafloor®-305 W.

UV Exposure

8 / Colour fastness

(EN ISO 105-B02)

Skid / Slip Resistance

R10 / R11

(DIN 51130)

Application

Application Information

Ambient Air Temperature

Minimum

+15 °C

Maximum

+30 °C

Relative Air Humidity

80 % r.h. max

Substrate Temperature

Minimum

+15 °C

Maximum

+30 °C

Substrate Moisture Content

< 4 % part by weight

Applied Product Ready for Use

Temperature

Foot traffic

Light traffic

Full cure

+15 °C

~30 hours

~48 hours

~6 days

+20 °C

~16 hours

~24 hours

~4 days

+30 °C

~12 hours

~18 hours

~3 days

Note: Times apply when the last layer of the system has been applied. Times are affected by changing ambient conditions, particularly temperature and relative humidity.
Application consumption

Consumption

Layer

Product

Consumption

Primer or scratch coat

1 × Sikafloor®-150/ -151

~0,3 kg/m² to 0,5 kg/m²

Wearing layer

1 × Sikafloor®-3310*

~2,8 kg/m² (2 mm)

Seal coat / top coat

1 - 2 × Sikafloor®-305 W

~0,15 kg/m² per layer

* Sikafloor®-3310 can be filled up to 2 : 1 with quartz sand (0,1– 0,3 mm) by weight with a consumption of ~3,4 kg/m² in 2 mm (resin - ~2,26 kg and quartz sand ~1,13 kg)
Application steps

APPLICATION INSTRUCTIONS

CONSIDERATIONS FOR APPLICATION

IMPORTANT

Temporary heating

If temporary heating is required, do not use gas, oil, paraffin or other fossil fuel heaters. These produce large quantities of both carbon dioxide and water vapour, which may adversely affect the finish. For heating, use only electric powered warm air blower systems.

IMPORTANT

Indentations

Under certain conditions, underfloor heating or high ambient temperatures combined with high point loading may lead to indentations in the resin.

IMPORTANT

Protecting the material after application

After application, protect the System from damp, condensation and direct water contact for at least 24 hours.

Documents