Product Data Sheet Safety Data Sheet Show all documents
Sikagard®-551 S Elastic Primer

Sikagard®-551 S Elastic Primer

Primer for very dense or porous concrete surfaces or difficult application conditions

Sikagard®-551 S Elastic Primer is a one-component, solvent containing primer for very dense or very porous concrete surfaces and/or difficult application conditions.
Sikagard®-551 S Elastic Primer is part of a system that complies with the requirements of EN 1504-2 as protective coating.

  • Deep penetration
  • Water vapour permeable
  • Surface strengthening
Sikagard®-551 S Elastic Primer
Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

Priming of very dense concrete and of very porous concrete (having a tensile strength lower than 1 N/mm2)
Sikagard®-551 S Elastic Primer can also be used as primer on firmly adhering existing solvent based coatings   Sikagard®-551 S Elastic Primer is part of the Sikagard® acrylic coating system:
  • Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9)
  • Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9)
  • Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9)

Advantages

  • Deep penetration
  • Water vapour permeable
  • Surface strengthening

Packaging

10 l and 20 kg pails

Colour

Slightly yellowish liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Protective coating according to EN 1504-2, DoP 02 03 03 06 001 0 000001 1010; certified by Factory Production Control Body: 0921; certificate 0921-BPR-2073 and provided with the CE-mark
Product Information

Chemical Base

Solvent based polymer binder

Shelf Life

36 months from date of production if stored properly in undamaged and unopened original sealed packaging.

Storage Conditions

Store in cool and dry conditions. Protect from direct sunlight and frost.

Density

~0.94 kg/l (at +20 °C)

Flash Point

~33 °C
System information

System Structure

1 × Sikagard®-551 S Elastic Primer

 

Application

Application Information

Ambient Air Temperature

+8 °C min. / +35 °C max.

Relative Air Humidity

< 80 %

Dew Point

Substrate and ambient temperature must be at least 3 °C above dew point.

Substrate Temperature

+8 °C min. / +35 °C max.

Waiting Time / Overcoating

Waiting time before coating:

Temperature

Time

+8 °C

36 hours

+20 °C18 hours

+35 °C

8 hours

Note: When application is on existing coating, waiting time prior to overcoat the primer will increase by 100 %.
Both water dispersed and solvent containing coating system can be used as subsequent topping.

Curing Treatment

Sikagard®-551 S Elastic Primer does not require any special curing but must be protected from rain for at least 6 hours at +20 °C.
Consumption

Consumption

0.10–0.15 kg/m2 dependent on the absorbency of the substrate
Application steps

APPLICATION

Sikagard®-551 S Elastic Primer is supplied ready for use. Stir thoroughly prior to application.

Sikagard®-551 S Elastic Primer can be applied by brush, roller or airless spray.
With very dense substrate up to 10% Sika Thinner C may be added to Sikagard®-551 S Elastic Primer to increase penetration.

CLEANING OF TOOLS

Clean all tools and application equipment with Sika Thinner C immediately after use. Hardened / cured material can only be removed mechanically

Documents