Parex Epoxy Injection Grout
LOW VISCOSITY EPOXY INJECTION GROUT
Parex Epoxy Injection Grout is a two-part, epoxy, low viscosity, injection grout formulated to be placed by free flow under gravity, or may be injected using a suitable hand or mechanical pump. The system gives rapid strength gain obtaining mechanical properties several times those of high quality concrete. The product is non-shrink enabling complete filling of the crack, fissure or void. The hardened grout is resistant to most chemicals, stable to sea water, petroleum products and resists freeze-thaw cycles.
- Low viscosity.
- High mechanical strength.
- Good adhesion to most construction materials (i.e. concrete, masonry, stone, steel, wood, etc.).
- Easy to use.
- Can be placed by free flow under gravity, or injected with a suitable hand or mechanical pump.
- Suitable for grouting and sealing the narrowest of gaps (as thin as 0.1mm).
- Can be used to fill cracks, fissures and voids up to 10mm.
- Non-shrink.
- Application temperature range +5°C to +30°C.
- High early strength gain.
- Hardened grout is resistant to most chemicals, sea water and petroleum products.
- Can provide structural support where dynamic load resistance is required.
- Can be used to fill and bond cracked concrete.
- Hardened grout resists freeze-thaw cycles.
- Solvent free.
- Available in two convenient sizes: 1.13kg and 6.075kg.