Product Data Sheet Show all documents

SikaInject®-201 DE

Formerly TPH.® PUR-O-CRACK PLUS L / 2-C PU-injection resin for permanent waterproofing

SikaInject® 201 DE is a PU-based 2-component, super-low viscosity injection resin for permanent waterproofing according to EN 1504-5.

  • Slow reacting, can be accelerated with SikaInject® AC-20 DE
  • Highly elastic
  • For pressing water and non-pressing water
  • Can be injected by 1-C-pumps or 2-C-pumps
Contact Us
Product Data Sheet Show all documents

Usage

  • Stopping of flowing water, filling of cracks, joints & honeycombs
  • Injection into masonry, concrete structures, civil engineering construction and tunneling
  • Ground and rock stabilization
  • Curtain injection into ground and sand
  • Joint waterproofing with SikaFuko Injection hose systems
 

Advantages

  • Slow reacting, can be accelerated with SikaInject® AC-20 DE
  • Highly elastic
  • For pressing water and non-pressing water
  • Can be injected by 1-C-pumps or 2-C-pumps

Packaging

SikaInject® 201 DE, part A: 10 kg or 20 kg

SikaInject® 201 DE, part B: 12 kg or 24 kg

Colour

SikaInject® 201 DE, part A: transparent yellowish, liquid

SikaInject® 201 DE, part B: brown, liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • General Building Inspectorate Approval for curtain grouting
Product Information

Shelf Life

24 months from date of production

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperature between +5 °C and +35 °C.

Density

SikaInject® 201 DE, part A: ~1.01 kg/l (23°C, ISO 2811-1)

SikaInject® 201 DE, part B: ~1.21 kg/l (23°C, ISO 2811-1)

Viscosity

SikaInject® 201 DE, part A: ~115 mPas (23°C, ISO 2555)

SikaInject® 201 DE, part B: ~40 mPas (23°C, ISO 2555)
Technical Information

Shore A Hardness

~10 (DIN ISO 7619-1)

Tensile Strength

~0.6 MPa (DIN EN ISO 527)

Elongation at break

~220% (DIN EN ISO 527)

Application

Application Information

Mixing Ratio

1:1 parts by volume

Ambient Air Temperature

+5 °C min. / +35 °C max.

Substrate Temperature

+5 °C min. / +35 °C max.

Open Time

~30 min (DIN EN ISO 9515)

Gel time

~130 min (ASTM D7487)

Reaction time

SikaInject-201 DE
SikaInject AC 20  
(g)(%) Potlife
200.10%78 min
400.20%55 min
600.30%28 min
800.40%16 min
1000.50%11 min
1500.75%7 min
2001.00%4 min
3001.50%3.5 min
catalyst mixed in 20 kg A-component
Values without water at 23° C
Application steps

SUBSTRATE PREPARATION

Surfaces of cracks, joints and voids need to be clean, free of loose particles, dust, oil and any other bond-breaking substances.

Any dirt must be blown out with compressed air.

MIXING

Empty parts A and B into a dry clean mixing vessel and stir slowly (~250 rpm) and thoroughly for ~2 min until homogeneous. Observe the safety precautions. Containers are supplied according to the required mixing ratio of 1:1 parts by volume. Partial quantities can be measured into seperate vessels. After mixing pour the material into the pumps feed container (hopper) and use within potlife. If 2-component pumps are used the product can be pumped directly from the containers and will be mixed in a static mixer. When using accelerator SikaInject AC 20, measure the required quantity and pre-mix into part A of the base resin. 

CLEANING OF TOOLS

Pumps and tools to be cleaned using appropriate cleaner.

Documents