Fast to apply, crack-bridging, polyurethane and polyurea based liquid membranes.

Fast to apply, crack-bridging, polyurethane and polyurea based liquid membranes. Sika liquid applied membranes (LAM) are highly elastic and flexible polymeric systems, usually based on polyurethane or polyurea resins with excellent technical properties for high performance applications. These materials are applied on prepared / primed external concrete surfaces by spraying and provide excellent solutions for complex detailing.

Liquid applied membranes will also prevent any lateral water underflow in the event of local damage. Application below the base slab is done on a special fleece before the structural concrete slab is placed.

Sikalastic® polyurea systems are ideally suited to the waterproofing of podium deck slabs and compatible with Sika solutions for below ground waterproofing, thereby offering a one-stop-shop solution for waterproofing the entire structure.

Sikalastic® Drainage and Protection Sheets

Sikalastic graphics

Highly flexible, very fast curing, pure polyurea based, liquid applied membranes with very good chemical resistance for both, vertical and horizontal areas.  

Sikalastic graphics

Internal or external applied waterstops based on PVC, TPO or galvanised steel for construction and movement joints.  

Sikalastic graphics

SikaSwell® swelling profiles are easily bonded to joints and penetrations in concrete with Sika® adhesives, normally with no additional work required to the reinforcement or formwork.

Sikalastic graphics

Highly flexible, very fast curing hybrid, liquid applied membrane with very good chemical resistance for both vertical and horizontal areas. Also HAPAS approved for use in bridge deck waterproofing.  

Sikalastic graphics

Injection hoses for construction joints and other details, with or without swelling strips, which can be used for sealing by injection and re-injection in the event of future movement etc.  

Sikalastic graphics

Sikalastic®-800 HA is a two component, solvent free, highly elastic, virtually odourless polyurea based waterproofing membrane.  

Complementary products for joint sealing and waterproofing

Sikalastic Primer-01
Sikalastic® Primer-01 is a two component, low odour, rapid curing, high solids, PUA/PU hybrid primer for consistent and durable adhesion of Sikalastic® Systems on cement based substrates.

Sikadur-Combiflex® SG System
High performance, over-banding sealing tape system for postsealing and waterproofing of construction and movement joints.