Product Data Sheet Show all documents

SikaShield® P65 MG 4 mm

ElastoPlastomeric bituminous cap sheet membrane surfaced with granules and flexible at -20 °C

SikaShield® P65 MG 4 mm is an APP/Polyolefine modified bituminous waterproofing membrane with a thickness of 4 mm. It is reinforced with a non-woven polyester fabric dimensionally stabilised with glass fibre and is flexible at -20 °C. The top surface is coated with mineral granules, which allows the permanent exposure to UV radiation. The underside of the product has a burn-off film for easy torch-application.

  • Easy to install by torching method
  • Very good flexibility
  • Fully bonded
 
Contact Us
Product Data Sheet Show all documents

Usage

The Product is used as a waterproofing membrane for:
  • Flat or sloped roofs with up to 15º pitch
  • New construction or refurbishment projects
  • As a cap sheet in a multi-layer roofing system
 

Advantages

  • Easy to install by torching method
  • Very good flexibility
  • Fully bonded
 

Packaging

Roll width

1.0 m

Roll length

8.0 m

Refer to the current price list for available packaging variations.

Colour

Top surface

Mineral Granules

Bottom surface

Polyethylene film

Top layer colour

Refer to current price list for color variations

 

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

CE marking and declaration of performance based on EN 13707:2004+A2:2009 Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics
Product Information

Chemical Base

Composition

APP/Polyolefine modified bitumen

Reinforcing material

Non-woven polyester fabric dimensionally stabilised with glass fibre

Shelf Life

36 months from date of production

Storage Conditions

The Product must be stored in original unopened and undamaged packaging in dry conditions and temperatures between +5 °C and +35 °C. Protect the Product from direct weather exposure and sunlight. Store in a vertical position.

 

Thickness

4.0 mm ± 0.2 mm (on selvage edge)

(EN 1849-1)
Technical Information

Resistance to Impact

≥ 1250 mm

(EN 12691)

Joint Shear Resistance

Longitudinal (MD)

750 N/50 mm ± 150 N/50 mm

Transversal (CMD)

600 N/50 mm ± 120 N/50 mm

(EN 12317-1)

External Fire Performance

Broof (t4) (as part of a system build up)

(EN 13501-5)

Reaction to Fire

Class E

(EN 13501-1)

Water Tightness

Method B, 24 hours at 60 kPa

Pass

(EN 1928)

Flexibility at low temperature

≤ -20 °C

(EN 1109)

Application

Application Information

Ambient Air Temperature

Maximum

+40 °C

Minimum

+5 °C

Relative Air Humidity

Maximum

80 %

Substrate Temperature

Maximum

+40 °C

Minimum

+5 °C

 
Application steps

APPLICATION INSTRUCTIONS

Please refer to the SikaShield® Installation Guide

 

Documents