Product Data Sheet Show all documents
Sika®-1 Pre-bag Screed Mortar

Sika®-1 Pre-bag Screed Mortar

PRE-BAGGED SCREED MORTAR

Sika®-1 Pre-bag Screed Mortar is part of the Sika® 1 Pre-Bagged Structural Waterproofing System. These special mortars are pre-bagged kiln dried blends of specially graded aggregates and cements, with waterproofing admixtures, packaged in 4 grades at the appropriate mix ratios for optimum application performance and durability. When mixed with water they provide the multicoat components for the structural waterproofing systems

  • Type A waterproofing system according to BS8102:2022
  • Proven resistance to hydrostatic back pressure
  • Fully bonded waterproofing barrier
  • Can be applied to wet substrates
  • For use on concrete, brick and structural blockwork
  • Can be used internal and externally
  • Can be applied to wall, floors and soffits
  • Quality controlled system
  • Used for negative or positive water pressure situations
Sika®-1 Pre-bag Screed Mortar
Product Data Sheet Show all documents

Usage

  • Internal waterproofing of below ground structures to meet the requirements of BS8102:2022 Grades 1 - 3
  • Waterproofing of swimming pools and other water retaining structures
  • Waterproofing of basements, cellars and vaults
  • Waterproofing of tunnels
 

Advantages

  • Type A waterproofing system according to BS8102:2022
  • Proven resistance to hydrostatic back pressure
  • Fully bonded waterproofing barrier
  • Can be applied to wet substrates
  • For use on concrete, brick and structural blockwork
  • Can be used internal and externally
  • Can be applied to wall, floors and soffits
  • Quality controlled system
  • Used for negative or positive water pressure situations

Packaging

Supplied in 25kg Packs with a coloured Blue Band

Colour

Graded kiln dried aggregates, OPC with waterproofing admixtures

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

BBA Certificate No 00/3761 Product Sheet 1 for Sika-1 Waterproofing Systems
Product Information

Shelf Life

6 months from date of production

Storage Conditions

Stored in dry condition at temperatures between +10°C and +30°C

Density

2200 kg/m3
Technical Information

Compressive Strength

57 N/mm2

(EN 12190)

Flexural Strength

7.5 N/mm2

(EN 196-1)

Application

Application Information

Ambient Air Temperature

+5°C / +30°C
Consumption

Consumption

Mix each 25 kg bag Sika®-1 Pre-bag Screed Mortar with 2.5L of clean water. A mixed 25kg bag of Sika®-1 Pre-bag Screed Mortar will yield ~12.3L of mortar which is sufficient to cover 0.6m2 at 20 mm thick
Application steps

APPLICATION INSTRUCTIONS

FLOORS/GENERAL:
All existing treatments shall be completely removed and the exposed concrete floor mechanically prepared, washed down and brushed to ensure full removal of all loose debris to give an exposed aggregate finish, free of laitance, and surface contamination.

MIXING

Place the correct amount of water into a mixer, add the mortar and mix until the water has been fully combined, approximate 3 minutes. The Sika®-1 Pre-bag Render Mortar should be mechanically mixed using a forced action mixer or drill and paddle mixer to limit the amount of air entrapment. A tumble mixer is not suitable for mixing.

APPLICATION

Refer to Sika-1 Waterproofing system datasheet for full application methods

 

Documents