Sikafloor® MultiDur ET-19
Sikafloor® MultiDur ET-19 is a 2-part epoxy coloured resin based floor coating system that can provide a hard wearing, seamless, low maintenance textured gloss finish. For medium - heavy wear conditions. Thickness ~1.0 mm. Internal use.
- Seamless
- Light to medium mechanical resistance
- Medium chemical resistance
- Waterproof
- Textured gloss finish
- Easy cleanability
- Slip resistant
- Low maintenance
System Structure
Usage
- On concrete and cementitious screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- Multi-storey and underground car parks, maintenance hangars and wet process areas, e.g. beverage and food industry.
- Floors where slip resistance and easy cleanability is required
Advantages
- Seamless
- Light to medium mechanical resistance
- Medium chemical resistance
- Waterproof
- Textured gloss finish
- Easy cleanability
- Slip resistant
- Low maintenance
Packaging
Refer to the individual Product Data Sheets
Colour
Available in many colours
Appearance
Textured, gloss finish
System Details
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection product for concrete - Coating
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings
- Fire Testing ISO 11925-2, Sikafloor® MultiDur ET-19, Hoch, Classification report No. PB-Hoch-180197
- Fire Testing ISO 9239-1, Sikafloor® MultiDur ET-19, Hoch, Classification report No. PB-Hoch-180198
- Fire Testing EN 13501-1, Sikafloor® MultiDur ET-19, Hoch, Classification report No. PB-Hoch-180199
System Structure
Sikafloor® MultiDur ET-19 ( ~1.0 mm)
| Layer | Product |
| 1. Primer | Sikafloor® -150/ -151 |
| 2. Top Coat | 1–2 × Sikafloor®-264 N Thixo |
Composition
Epoxy
Nominal Thickness
~1.0 mm
Shelf Life
Refer to the individual Product Data Sheets
Storage Conditions
Refer to the individual Product Data Sheets
Shore D Hardness
| ~76 (7 days / +23 °C) | (DIN 53 505) |
Compressive Strength
| ~60 N/mm2 (Resin, 28 days / +23 °C) | (EN 196–1) |
Tensile Adhesion Strength
| > 1.5 N/mm² (failure in concrete) | (ISO 4624) |
Reaction to Fire
| Bfl-S1 | (DIN EN 13501-1) |
Chemical Resistance
Resistant to many chemicals. Contact Sika Technical Service for specific information.
Skid / Slip Resistance
| R9 | (DIN 51130) |
Application
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
<4 % pbw
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®–264 N Thixo on Sikafloor®–150/–151 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 24 hours | 3 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
| +20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
| +30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur ET-19 ( ~ 1.0 mm)
| Coating System | Product | Consumption |
| 1.Primer | 1 × Sikafloor®-150/ -151 | ~0.3–0.5 kg/m² |
| 2.Top coat | 1–2 × Sikafloor®-264 N Thixo | ~0.5–0.8 kg/m² per layer |
CLEANING
Refer to the Information Manual Sikafloor®- Cleaning Regime