Sikafloor®-3000
Sikafloor®-3000 is a two part, aliphatic, solvent free, very low VOC emission certified, elastic, self-smoothing polyurethane resin.
- Very low VOC emission
- Solvent free
- Comfortable
- Footwarm
- Reduces footfall sound
- Permanently elastic
- Good mechanical resistance
- Very high yellowing resistance
- Decorative designs possible using coloured chippings etc.
- Easy to apply
- Low maintenance finish
Advantages
- Very low VOC emission
- Solvent free
- Comfortable
- Footwarm
- Reduces footfall sound
- Permanently elastic
- Good mechanical resistance
- Very high yellowing resistance
- Decorative designs possible using coloured chippings etc.
- Easy to apply
- Low maintenance finish
Packaging
Part A | 15.0 kg containers |
Part B | 5.0 kg containers |
Part A+B | 20.0 kg ready to mix units |
Colour
Resin - part A | coloured, liquid |
Hardener - part B | transparent, liquid |
Available in Steely Glimpse, Amberish Grey, Brilliant Blue, Sea Mist, Sky Line, Spring Grass, Concrete Grey, Latte Macchiato, Light Ivory, Black, Frosty Tree, Sweet Citrus, Sunfire, Brown Beige, Bordeaux Wine.
Note: With bright colours such as yellow , orange etc., colour variations may occur
Product Details
ENVIRONMENTAL INFORMATION
- Conformity with LEED v4 MRc 4 (Option 2): Building Product Disclosure and Optimization - Material Ingredients
- IBU Environmental Product Declaration (EPD) available
APPROVALS / STANDARDS
- Coating for concrete protection according to the requirements of EN 1504-2:2004 and the EN 13813:2002, DoP 0208120400200000251041 certified by Factory Production Control Body, 0620 and provided with the CE-mark.
- Emission tested according to the AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt – German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Eurofins Report No 392-2014-00156502_02.
- Reaction to Fire classification according to DIN EN 13501-1 Class Bfl/S1 for Sika® ComfortFloor® Decorative system, report 14-529 Universiteit Gent.
Chemical Base
PU-polyurethane
Shelf Life
12 months from date of production
Storage Conditions
The packaging must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5°C and +30°C.
Density
Part A | ~ 1.45 kg/l |
Part B | ~ 1.16 kg/l |
Mixed resin | ~ 1.40 kg/l |
All Density values at +23°C
Solid Content
~ 100% (by volume) / ~ 100% (by weight)
Shore Hardness
Shore A: ~ 84 (14 days / +23°C) | (DIN 53505) |
Tensile Strength
~ 6.0 N/mm² (14 days / +23°C) | (DIN 53504) |
Tensile adhesion strength
> 1.5 N/mm2 (failure in concrete) | (EN 13892-8) |
Tear Strength
~ 18 N/mm (14 days / +23°C) | (ISO 34-1) |
Chemical Resistance
Sikafloor®-3000 always has to be sealed with Sikafloor®-304 W. Therefore, refer to chemical resistance chart of Sikafloor®-304 W.
Application
Mixing Ratio
Part A : part B = 75 : 25 (by weight)
Layer Thickness
Sikafloor®-3000 is typically installed at 2,8 kg/m² giving a 2 mm nominal thickness.
Product Temperature
+15°C min. / +30°C max.
Ambient Air Temperature
+15°C min. / +30°C max.
Relative Air Humidity
80% r.h. max.
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+15°C min. / +30°C max.
Substrate Moisture Content
< 4% pbw moisture content.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Pot Life
Temperatures | Time |
+10°C | ~ 120 minutes |
+20°C | ~ 90 minutes |
+30°C | ~ 45 minutes |
Applied Product Ready for Use
Temperature | Foot traffic | Light traffic | Full cure |
+10°C | ~ 30 hours | ~ 48 hours | ~ 6 days |
+20°C | ~ 16 hours | ~ 24 hours | ~ 4 days |
+30°C | ~ 12 hours | ~ 18 hours | ~ 3 days |
Note: Times are approximate and will be affected by changing ambient conditions.
Refer to the System Data Sheets of the Sikafloor®-PS24 system (Sika® Comfortfloor® Decorative) and Sikafloor®-PS26 system (Sika® Comfortfloor® Decorative Pro) for information on systems being ready for use.
Consumption
Please refer to the System Data Sheet
MIXING
Please refer to the Sika Method Statement Mixing & Application
APPLICATION
Please refer to the Sika Method Statement Mixing & Application
Self-smoothing system 2.0 mm:
Sikafloor®-3000 is poured and spread evenly by means of a serrated trowel or pinrake. If desired broadcast slightly and evenly with Sikafloor® Colourchips. If during application locally some imperfections become visible, like pigment floatation, this local spot can be treated immediately with a spike roller to eliminate the imperfection.
Tools for application:
- Serrated trowel for smooth wearing layer: e.g. Large-Surface Scrapper No. 565, Toothed blades No. 25
- Recommended supplier of tools:
TECHNO-Werkzeuge A.E; Vertriebs GmbH
Dieselstr. 44; 42579 Heiligenhaus, Phone: 02056 / 9846-0, Info@Techno-Vertrieb.de; Homepage: http://www.techno-vertrieb.de PPW-Polyplan-Werkzeuge GmbH, Phone: +49 40/5597260, www.polyplan.com.
CLEANING OF TOOLS
Clean all tools and application equipment with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically.
Please refer to the Sika Method Statement Mixing & Application