Sikafloor® Conductive Set

Unlimited

The packaging must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5°C and +30°C.

Every earthing point is able to conduct approx. 200-300 m².

Ensure the longest distance of each earthing point in the area is max. 20 m to the next earthing point. For longer distances, additional earthing plates have to be placed.

• Prepare and prime the substrate in accordance with the relevant PDS of the uesed system.
• Drill a hole with diameter of 8 mm and a depth of > 50 mm.
• Remove all dust, loose and friable material and inserta size 8 dowel. The dowel must be flush with the floor surface.
• Screw the threaded rod with hexagon socket into the plug with an Allen key, so that 16 mm of the threaded rod protrude.
• Glue the copper strips (2 x 10 mm) on both sides of the hole.
• Place the large (D=60 mm) and middle (D=30 mm) washers over the threaded rod and secure with the nut (M6) so that the washers are pressed onto the copper strips with good contact.
• Push the transparent plastic hose over the threaded rod so that the hose fits tightly.
• Apply the conductive primer Sikafloor®-220 W Conductive
• Apply the conductive wearing course.
• After curing of Sikafloor® materials, remove the transparent plastic hose.
• Clean the head of the threaded rod properly. Fix the brass eyelet using the self‐locking nut (M 6) at the threaded rod.
• Connect the grounding cable with the brass eyelet.