Sikafloor®-267
2-part epoxy floor coating for multi-purpose use
Sikafloor®-267 is a 2-part coloured epoxy resin. It provides a hard wearing, smooth gloss finish, or a slip resistant finish when broadcast with aggregates. Varying thicknesses can be achieved from 0,6 mm to 3,0 mm. It is suitable for medium to heavy wear conditions.
- Suitable for indoor applications due to low odour
- Multi-purpose product - can be used in many different kinds of applications
- Resistant to many chemicals
- Impermeable to liquids
- Abrasion resistant
- Slip resistant
- Can be filled with sand to produce a self-levelling coating
- High mechanical resistance
Usage
The Product can be used as a:- Roller coating
- Textured coating
- Self-levelling coating
- Seal / Top coat for slip resistant broadcast systems
Advantages
- Suitable for indoor applications due to low odour
- Multi-purpose product - can be used in many different kinds of applications
- Resistant to many chemicals
- Impermeable to liquids
- Abrasion resistant
- Slip resistant
- Can be filled with sand to produce a self-levelling coating
- High mechanical resistance
Packaging
| Container Part A | 25,5 kg |
| Container Part B | 4,5 kg |
| Container Part A + Part B | 30 kg |
Colour
| Part A | coloured liquid |
| Part B | transparent liquid |
Note: When the product is exposed to direct sunlight, there may be some discolouration and colour variation. This has no influence on the function and performance of the coating.
Available colours are limited. Please contact Sika Customer Services for availability.
Product Details
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 13813 — Screed material and floor screeds — Synthetic resin screed material
- CE Marking and Declaration of Performance to EN 1504-2 — Products and systems for the repair and protection of concrete structures — Part 2: Surface protection systems for concrete — Coating
- Slip Resistance, DIN 51130, Roxeler, Certificate No. 020223-20-1
Chemical Base
Epoxy
Shelf Life
24 months from date of production
Storage Conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
Refer to current Safety Data Sheet for information on safe handling and storage.
Density
| Part A | ~1,6 kg/l |
| Part B | ~0,99 kg/l |
| Mixed Product | ~1,48 kg/l |
Solid content by mass
100 %
Solid content by volume
100 %
Shore D Hardness
| ~75 | (EN ISO 868) |
Abrasion Resistance
| ~37 mg (CS10 / 1000 g / 1000 cycles) | (EN ISO 5470-1) |
Compressive Strength
| ~56 N/mm² (Resin filled with 70 % quartz sand 0,1–0,3 mm, after 7 days) | (EN 13892-2) |
Flexural Strength
| ~28 N/mm² (Resin filled with 70 % QS 0,1–0,3 mm, after 7 days) | (EN 13892-2) |
Tensile adhesion strength
| > 1,5 N/mm² (failure in concrete) | (EN 1542) |
Thermal Resistance
| Short-term, maximum 7 days | +60 °C |
Chemical Resistance
Laboratory defined resistance to many individual chemicals. Before proceeding contact Sika Technical Services for specific information.
Application
Mixing Ratio
| Part A : Part B (by weight) | 85 : 15 |
Product Temperature
| Minimum | +10 °C |
| Maximum | +30 °C |
Ambient Air Temperature
| Minimum | +10 °C |
| Maximum | +40 °C |
Dew Point
Beware of condensation. The substrate and uncured applied product must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the surface of the applied product. Low temperatures and high humidity conditions increase the probability of blooming.
Substrate Temperature
| Minimum | +10 °C |
| Maximum | +40 °C |
Pot Life
| +10 °C | ~50 minutes |
| +20 °C | ~25 minutes |
| +30 °C | ~15 minutes |
Waiting Time / Overcoating
| Substrate temperature | Minimum | Maximum |
| +10 °C | ~36 hours | ~3 days |
| +20 °C | ~16 hours | ~48 hours |
| +30 °C | ~12 hours | ~24 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~48 hours | ~3 days | ~7 days |
| +20 °C | ~24 hours | ~2 days | ~5 days |
| +30 °C | ~20 hours | ~1 days | ~3 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
| Filled | ~0,9 to 1,2 kg/m²/mm (filled with 70 % quartz sand 0,1–0,3 mm) |
| Unfilled | ~0,7 kg/m² |
APPLICATION INSTRUCTIONS
IMPORTANT:
Strictly follow installation procedures
Strictly follow installation procedures as defined in Method Statements, application manuals and working instructions, which must always be adjusted to the actual site conditions.
EQUIPMENT
Application equipment
Mixing equipment
Electric single paddle mixer (300 to 400 rpm).
IMPORTANT:
Unsuitable mixing equipment
Do not use free fall mixers.
MIXING
- Mix Part A (resin) for ~30 seconds.
- Add Part B (hardener) to Part A.
- Mix Part A + B continuously for ~3 minutes until a uniformly coloured mix is achieved.
- (Optional) If necessary, gradually add between 2,5 % and 4 % by weight of flooring resin of Sika® Extender T.
- IMPORTANT: If product temperature is below +15 °C, gradually add ~1 % by weight of flooring resin of Sika® Thinner C.
- If additional materials were added, mix for a further 2 minutes until a uniform mix is achieved.
- To ensure thorough mixing, pour materials into another container and mix again to achieve a smooth and uniform mix.
- During the final mixing stage, scrape down the sides and bottom of the mixing container with a flat or straight edge trowel at least once to ensure complete mixing.
APPLICATION
IMPORTANT:
Protect from moisture
After application, protect the Product from damp, condensation and direct water contact for at least 24 hours.
IMPORTANT:
No application on rising moisture
Do not apply on substrates with rising moisture.
IMPORTANT:
Temporary heating
If temporary heating is required, do not use gas, oil, paraffin or other fossil fuel heaters. These produce large quantities of both carbon dioxide and water vapour, which may adversely affect the finish. For heating, use only electric powered warm air blower systems.
Textured coating
- Pour the mixed Product onto the substrate.
Note: The consumption is specified in Application Information. - Apply the Product in two directions at right angles with a textured roller.
Note: A seamless finish can be achieved if a 'wet edge' is maintained during application.
Roller coating
- Pour the mixed Product onto the substrate.
Note: The consumption is specified in Application Information. - Back roll the surface in two directions at right angles with a short pile roller.
Note: A seamless finish can be achieved if a 'wet edge' is maintained during application.
Slip resistant broadcast coating
- Pour the mixed Product onto the substrate.
Note: The consumption is specified in Application Information. - Apply the Product evenly over the surface with a squeegee.
- Back roll the surface in two directions at right angles with a fleece roller.
Note: A seamless finish can be achieved if a 'wet edge' is maintained during application.
Self-levelling coating
- Pour the mixed Product onto the substrate.
Note: The consumption is specified in Application Information. - Apply the Product evenly over the surface with a trowel.
- Back roll the surface in two directions at right angles with a spike roller.
Note: A seamless finish can be achieved if a 'wet edge' is maintained during application.