Product Data Sheet Show all documents
Sika® FloorJoint PDRS

Sika® FloorJoint PDRS

CARBON FIBRE PREFABRICATED FLOOR JOINT PANEL WITH INTEGRAL SEAL FOR CAR PARKS

Sika® FloorJoint PDRS is a carbon fibre reinforced polymer (CFRP) composite , prefabricated, floor joint panel with integral replaceable rubber seal and high mechanical resistance. It's concentric integral rubber seal allows low vibrations under direct car traffic.  Suitable for concrete slab vertical and horizontal movement. Gap widths: 0–50mm. Vertical movement: 30 mm. Sika® FloorJoint PDRS is the main part of the Sika® FloorJoint PB-30 PDRS System.

  • Grindable profile for level integration into the floor surface
  • Suitable for vertical and horizontal movements
  • Low vibrations under direct car traffic
  • Thermal expansion coefficient similar to resin based floors
  • Replaceable rubber seal
  • Easy to install / Easy to repair
  • Short down time - Trafficable after 24 hours
  • High chemical resistance
  • Non corroding
  • High mechanical resistance
  • Joint movement horizontal: 50 mm (-20/+30 mm)
  • Joint movement vertical: 30 mm (-15/+15 mm)
  • Recessed flange along both sides of panel
  • Double waterproof system design with integrated Sikadur Combiflex SG System
Product Data Sheet Show all documents

Usage

  • Floor joint panel for new build and refurbished joints in concrete / concrete screeds in:
  • Inner and outer zones of car park decks and ramps
 

Advantages

  • Grindable profile for level integration into the floor surface
  • Suitable for vertical and horizontal movements
  • Low vibrations under direct car traffic
  • Thermal expansion coefficient similar to resin based floors
  • Replaceable rubber seal
  • Easy to install / Easy to repair
  • Short down time - Trafficable after 24 hours
  • High chemical resistance
  • Non corroding
  • High mechanical resistance
  • Joint movement horizontal: 50 mm (-20/+30 mm)
  • Joint movement vertical: 30 mm (-15/+15 mm)
  • Recessed flange along both sides of panel
  • Double waterproof system design with integrated Sikadur Combiflex SG System

Packaging

Length

Single Panels

Panels/Set

Length rubber seal

Pallets

100.8 m

168

84

104 m

2 EUR-pallets

25.2 m

42

21

26 m

1 EUR-pallet

12 m

20

10

13 m

1 EUR-pallet

6 m1056.5 m1 EUR-pallet

Colour

Panel

~RAL7037

Rubber Seal

Black

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Fire Testing DIN EN 13501-1, Sika® FloorJoint, Hoch, Test report No. PB-Hoch-140803-3
  • Fire Testing DIN EN ISO 11925-2, Sika® FloorJoint, Hoch, Test report No. PB-Hoch-140801-3
  • Fire Testing DIN EN ISO 9239-1, Sika® FloorJoint, Hoch, Test report No. PB-Hoch-140802-3
Product Information

Chemical Base

PanelCarbon fibre reinforced polymer

Seal

Rubber

 

Shelf Life

Composite Panel

3 years from date of production

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C and must always be stored in the horizontal position in order to avoid bending.  Always refer to packaging.

Dimensions

Length

1200 mm

Width

290 mm

Height

18/23 mm
Technical Information

Compressive Strength

Joint panel: ~ 60 N/mm² (after 14 days at 23 °C / 50 % r.h)

(DIN EN 196-1)

Chemical Resistance

Resistant to many chemicals. Contact Sika Technical Services for specific information.

Joint Design

Maximum gap width1:

50 mm

Positive horizontal joint movement2:

+30 mm

Negative horizontal joint movement3:

-20 mm

Positive vertical joint movement4:+15 mm
Negative vertical joint movement5:-15 mm
  1. Width of the gap in the concrete below Sika® floor Joint panel during installation.
  2. Positive horizontal joint movement is the amount the gap can horizontally open, compared to its original width during installation of Sika® FloorJoint PDRS.
  3. Negative horizontal joint movement is the amount the gap can horizontally close, compared to its original width during installation of Sika® FloorJoint PDRS
  4. Positive vertical joint movement is the amount the gap can vertically open, compared to its original gap during installation of Sika® FloorJoint PDRS.
  5. Negative vertical joint movement is the amount the gap can vertically close, compared to its original gap during installation of Sika® FloorJoint PDRS.


Note: To provide a waterproof joint, first, install Sikadur® Combiflex® SG System below the Sika® FloorJoint PDRS.

Application

Application Information

Ambient Air Temperature

+15 °C min. / +25 °C max.  Refer to additional individual Product Data Sheets where required for specific installations.

Relative Air Humidity

80 % r.h. max.

Dew Point

Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.

Substrate Temperature

The ideal installation temperature is approx. +15 °C min. / +25 °C max.
Refer to the product data sheet of the individual product for specific information.

Substrate Moisture Content

<4 % parts by weight
Test method: Sika Tramex Meter, CM-measurement or oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Consumption

Consumption

1 panel consisiting out of two pieces of polymer panels and the ruber seal for total length of 1.2 linear metre.
Application steps

APPLICATION

Reference must be made to further documentation where applicable, such as relevant method statement, application manual and installation or working instructions. Refer to the Sika Information Manual: Sika® FloorJoint PDRS.

Documents