Sika® Reemat Lite

Random glass fibre matting

Product does not expire if correctly stored

The product must be stored properly in original, unopened and undamaged sealed packaging, flat and wrinkle free, in dry conditions at temperatures between +5 °C and +35 °C.

~30 g / m²

Prior the application of the Sikagard® Hygienic Coating System the priming coat if used must have cured for the appropriate Waiting Time / Overcoating (please refer to the PDS of the appropriate primer). Damageable areas (handrails etc.) have to be protected with tape or plastic wrapping.

Sika® Reemat Lite is applied in combination with Sikagard® Hygienic Coatings.

Apply first coat of Sikagard® Hygienic Coating with a consumption rate according to the PDS of the relevant hygienic coating system. Work only so far in advance that the material stays liquid.

Roll out the Sika® Reemat Lite and ensure that there are no bubbles or creases. Overlapping of Sika® Reemat Lite must be minimum 5 cm and ensure overlaps are sufficiently wet to bond.

The roller may require only a little extra material to remain wet but no further significant material needs to be added at this stage.

After the coat as had the appropriate Waiting Time / Overcoating contine with subsequent coats as per the relevant Sikagard® Hygienic Coating Datasheet / System Datasheet.