Product Data Sheet Show all documents
Sikafloor®-01 Primer

Sikafloor®-01 Primer

Water-based flooring primer for levelling compounds and tile adhesives

Sikafloor®-01 Primer is a 1-part, water-based, synthetic resin concentrate which is diluted with water and used to prime cementitious, wood and mastic asphalt floor substrates. It is applied before using cementitious levelling compounds and tile adhesives to mainly reduce absorbency and improve adhesion onto the substrate. Internal use.

  • Low consumption / high coverage
  • Suitable for use with underfloor heating
  • Short waiting times
  • Reduces substrate dust
  • Compatible with defined substrates
  • Very low emissions
  • Applied by brush, roller or spray
  • Can be diluted with water
  • Ready for use
  • Solvent-free according to TRGS 610
Sikafloor®-01 Primer
Product Data Sheet Show all documents

Usage

As a primer for:
  • Reducing absorbency of substrate
  • Improving adhesion on smooth and sound substrates
  • Protecting the substrate against moisture from cementitious levelling compounds or tile adhesives
 

Advantages

  • Low consumption / high coverage
  • Suitable for use with underfloor heating
  • Short waiting times
  • Reduces substrate dust
  • Compatible with defined substrates
  • Very low emissions
  • Applied by brush, roller or spray
  • Can be diluted with water
  • Ready for use
  • Solvent-free according to TRGS 610

Packaging

1 kg, 10 kg and 5 kg containers

Refer to current price list for packaging variations

Colour

Blue liquid

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

  • IBU Environmental Product Declaration (EPD)
  • VOC emission classification GEV-Emicode EC1PLUS, license number 6158/24.02.97
Product Information

Chemical Base

Synthetic dispersion

Shelf Life

12 months from date of production

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging. Material that has been mixed with water must be used within a week.

Density

~1.0 kg/l

 

Application

Application Information

Substrates

Substrate compatibility:

  • Concrete
  • Cementitious screeds
  • Calcium sulphate (Anhydrite) screeds
  • Substrates with existing water-resistant adhesive residue
  • Wood: OSB and chipboard
  • Ceramic tiles
  • Mastic asphalt screeds IC 10 and IC 15 according to EN 13 813
  • Other substrate types contact Sika Technical Services

Mixing Ratio

SubstrateDilution. Sikafloor®-01 Primer : Water

Cementitious screeds or concrete

1 kg  : 3 L water

Calcium sulphate (Anhydrite) screeds1 kg : 1 L water

Ceramic tiles, old water-resistant adhesive residue, chipboard or OSB, mastic asphalt screeds

Apply undiluted

Ambient Air Temperature

+5 °C min. / +30 °C max.

Substrate Temperature

+5 °C min. / +30 °C max.

Waiting Time / Overcoating

Levelling compounds and tile adhesives on Sikafloor®-01 Primer

Substrate

Minimum

Cementitious screeds or concrete~10 minutes
Calcium sulphate (Anhydrite) screeds *

~10 minutes

Calcium sulphate (Anhydrite) screeds **~24 hours
Chipboard or OSB~2 hours
Ceramic tiles, old water-resistant adhesive residue, mastic asphalt screeds~12 hours

*Calcium sulphate based levelling compounds are used.

**Cement based levelling compounds are used.

Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.

Reference must be made to the individual Product Data Sheets of the levelling compounds and tile adhesives.
Consumption

Consumption

~70 g/m2

This figure is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
Application steps

MIXING

Shake or stir container before use. If water dilution is required, after mixing product, pour into a clean container and mix in the appropriate amount of water.

APPLICATION

Strictly follow installation procedures as defined in method statements, application manuals and working instructions which must always be adjusted to the actual site conditions.

Apply primer onto the prepared substrate by roller, paintbrush, brush or suitable spraying equipment (mixing ratio at least 1:1). Ensure a continuous, pore free coat covers the substrate. On very absorbent substrates a second application maybe necessary. Avoid puddles of primer.

Confirm waiting /overcoating time has been achieved before applying subsequent products.

CLEANING OF TOOLS

Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically

Documents