Product Data Sheet Show all documents

Sikafloor®-200 Level

POLYMER MODIFIED CEMENTITIOUS FLOOR LEVELLING COMPOUND FOR 3-40 MM. C25-F6.

Very low emission cement based self levelling compound suitable for interior and exterior areas. Sikafloor®-200 Level is noted for its extremely low shrinkage.

  • Waterproof
  • Frost resistant
  • Self levelling
  • Rapid hardening
  • Suitable for application on subfloor heating systems
  • Layer thickness 3-40 mm (50 mm filled)
  • High level of hardness and strength
  • Low tension
  • Can be pumped
  • Suitable to build bonded screeds under ceramic tiles on cemetitious substrates
  • Standard Sikafloor EP primers give excellent bonding to the Sikafloor Level products
Sikafloor®-200 Level Sikafloor®-200 Level
Product Data Sheet Show all documents

Usage

Sikafloor®-200 Level is suitable for filling, smoothing and levelling of suitable substrates before applying parquet, ceramic tiles, textile and elastic floor coverings. Use suitable Sika Primer according to absorbency and condition of substrate.  

Advantages

  • Waterproof
  • Frost resistant
  • Self levelling
  • Rapid hardening
  • Suitable for application on subfloor heating systems
  • Layer thickness 3-40 mm (50 mm filled)
  • High level of hardness and strength
  • Low tension
  • Can be pumped
  • Suitable to build bonded screeds under ceramic tiles on cemetitious substrates
  • Standard Sikafloor EP primers give excellent bonding to the Sikafloor Level products

Packaging

25 kg in paper bags.

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

  • EC 1 PLUS R: very low emission, regulated.

APPROVALS / STANDARDS

  • C25-F6 According to EN 13813. DoP no. 115072001 provided with the CE-mark.
  • A1/A1fl according to DIN EN 13501-1
Product Information

Chemical Base

Cement based, Polymer modified

Shelf Life

6 months from the date of production.

Storage Conditions

Opened bags should be closed immediately and used up as soon as possible. Do not store below +5°C floor temperature.

 
Technical Information

Compressive Strength

Time

Temperature

Value

24 hours

+23°C

>10 N/mm²

7 days

+23°C

>20 N/mm²

28 days+23°C>25 N/mm²

Flexural Strength

28 days

> 6 Mpa (+20°C)

Application

Application Information

Pot Life

Approx. 40 min. at +20°C

Waiting Time / Overcoating

Sikafloor®-200 Level can be overcoated as follow:

  • Up to 60 mm after approx. 4 hours for ceramic coverings on concrete and cementious screeds interior

All values are approximate and are subject to climatic fluctuations. Values given with 20°C and 65 % rel. humidity, temperature of substrate +15 °C.

Applied Product Ready for Use

Ready for foot traffic after approx. 4 hours.
Consumption

Consumption

Approx. 1.8 kg/m2/mm.
Application steps

MIXING

For 25.0 kg Sikafloor®-200 Level approx. 4.5 l water. Add Sikafloor®-200 Level to cold clean water to form a homogeneous mixture Using a clean receptacle. Use of a mixer with disc stirring rod is recommended.

 

APPLICATION

  • After mixing spread Sikafloor®-200 Level using a suitable tool (surface blade) and remove the entrapped air using a spike roller.
  • Edge and movement joints must be brought through to the finished surface and should be protected against levelling compound to run in.
  • For normal absorbent substrates such as cement screeds, rapid cement screeds prime the surface with Sikafloor®-01 Primer (1:5) or Sikafloor®-03 Primer
  • For non-absorbent, smooth, sound substrates such as old water resistant adhesive residues, ceramic tiles, prime the surface with Sikafloor®-02 Primer
  • For calcium sulphate substrates such as calcium sulphate screeds, prime with Sikafloor®-01 Primer (1:1), drying time at least 24 hours or with the product Sikafloor®-03 Primer, drying time at least 1 hour.
  • For exterior use and high layer thicknesses prime the surface with Sikafloor®-01 Primer (1:3) or with Sikafloor®-03 Primer (drying time approx. 15- 30 minutes)
  • On concrete the levelling works should be applied to an adequate thickness and surface flatness as stipulated by the manufacturer of the tile or flooring finish.
  • Carry out preparatory work such as filling joints, evening out hollows and unevenness using a suitable Sika sturdy repair mortar.
  • If a second layer of levelling compound is to be applied, the first levelling com pound layer should be primed with Sikafloor®-01 Primer (1:1) or with the primer Sikafloor®-03 Primer. The maximum layer thickness may not be exceeded in case of two layer application. The second layer may not exceed the layer thickness of the first.

CLEANING OF TOOLS

Immediately after use clean tools with water.

Documents