Product Data Sheet Show all documents

Sikafloor® MultiDur EB-16

Low odour, slip-resistant, broadcast, coloured epoxy flooring coating System

Sikafloor® MultiDur EB-16 is a low odour broadcast, coloured, rigid flooring coating system based on epoxy resins. It is designed for trafficable and highly mechanically stressed areas.

  • Good resistance to abrasion
  • Good resistance to specific chemicals
  • Good mechanical resistance
  • Low odour
  • Seamless
Contact Us
Product Data Sheet Show all documents

Usage

The System is used in commercial and public buildings and areas such as:       
  • Car park decks
  • Manufacturing facilities and workshops
       Please note: the System may only be used for interior applications.  

Advantages

  • Good resistance to abrasion
  • Good resistance to specific chemicals
  • Good mechanical resistance
  • Low odour
  • Seamless

Colour

Cured system colour

Available in various colour shades

System Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Fire Classification Report, EN 13501-1, Ghent University, Report No. CR 20-0752-08.

  • Surface Protection System OS-8, Kiwa, Report No. P 13006-E.
System information

System Structure

Layers

Products

Scratch coat and broadcast

Sikafloor®-150 or

Sikafloor®-151

+ Quartz Sand Braodcasting

Seal or Top coatSikafloor®-267

Composition

Epoxy

Nominal thickness

2 mm to 3 mm

 
Technical Information

Resistance to wearing

AR0,5

(EN 13892-4)

Resistance to Impact

≥ IR4

(EN ISO 6272-1)

Compressive Strength

Cured 7 days at 23 °C

75 N/mm²

Tensile adhesion strength

≥ 1.5 MPa

(EN 1542)

Reaction to Fire

Class Bfl-s1

(EN 13501-1)

Chemical Resistance

Sikafloor®-267 provides the chemical resistance. Refer to Product Data Sheet.

Note: The exposed aggregates can be affected through various chemicals. A surface finish of an acrylic dispersion as a protection and maintenance layer is recommended.

Skid / Slip Resistance

R 12; V 6

(DIN 51130)

Sliding friction coefficient

0.52

Application

Application Information

Ambient Air Temperature

Maximum

+30 °C

Minimum

+10 °C

Relative Air Humidity

Maximum

80 % r.h. maximum

Dew Point

Refer to the individual Product Data Sheet.

Substrate Temperature

Maximum

+30 °C

Minimum

+10 °C

Substrate Moisture Content

Refer to the individual Product Data Sheet.

Waiting Time / Overcoating

Before applying Sikafloor®-267 on the primer or scratch coat, allow:

Temperature

Minimum

Maximum

+10 °C

~24 hours

~3 days

+20 °C

~12 hours

~48 hours

+30 °C

~8 hours

~24 hours

Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.

Applied Product Ready for Use

Temperature

Foot Traffic

Light Traffic

Full Cure

+10 °C

~48 hours

~6 days

~10 days

+20 °C

~24 hours

~4 days

~7 days

+30 °C

~20 hours

~48 hours

~5 days

Note: Times apply when the last layer of the system has been applied. Times are affected by changing ambient conditions, particularly temperature and relative humidity.
Application consumption

Consumption

Layers

Products

Consumption

Scratch Coat

Sikafloor®-150 or

Sikafloor®-151

filled with 40 % quartz sand 0.1–0.3 mm

1 × ~2.0 kg/m²

Broadcast in Excess

Quartz Sand 0.3-0.8 mm

4-6 kg/m²

Seal or Top Coat

Sikafloor®-267

1 × 0.6–0.7 kg/m²

Note: Consumption data is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level, wastage or any other variations. Apply product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application equipment.

Documents